Part Number: ULTRASHOCK-EB-50
Price: $899.00
MadgeTech UltraShock-EB
The MadgeTech UltraShock-EB is a stand alone, battery operated, temperature, humidity, pressure and 3-axis shock data recorder. Continuously sampling at 500Hz, the shock sensors record time and date stamped peak acceleration data at the user-defined intervals that temperature, humidity and pressure readings are stored. Shock data may be displayed for the three axis as well as a calculated vector sum to provide overall acceleration/shock information, along with the temperature, humidity and pressure data. MadgeTech softwarealso provides a summary of statistics for average, minimum and maximum values for all of the sensors. Available in three ranges(±5g, ±50g, ±100g), with extended battery life. A software and cable kit is required for operation.
| Temperature Specifications |
| Sensor: |
Semiconductor |
| Range: |
-20 to +54ºC |
| Resolution: |
0.1ºC |
| Accuracy: |
±0.5ºC (0 to +50ºC) |
| |
| Humidity Specifications |
| Sensor: |
Capacitive Polymer |
| Range: |
0 to 95%RH |
| Resolution: |
0.1%RH |
| Calibrated Accuracy: |
±3%RH (±2%RH typical at 25ºC) |
| Specified Accuracy Range: |
+10 to +40°C; 10 to 80%RH |
| |
| Pressure Specifications |
| Sensor: |
Semiconductor Strain Gage |
| Range: |
0 to 30PSIA |
| Resolution: |
0.002PSIA |
| Calibrated Accuracy: |
±1.0%FSR at 25ºC; ±0.2% typical |
| Specified Accuracy Range: |
0 to 30 PSIA, 25°C |
| |
| Shock Specifications |
| Accelerometer Type: |
MEMS Semiconductor |
| Absolute Max. Acceleration: |
200g (all versions) |
| Sampling Rate: |
1.953ms/512Hz |
| Accelerometer Freq. Resp.: |
0Hz to approx. 400Hz |
|
UltraShock-EB Ranges
|
| Acceleration Range: |
±5 g |
±50 g |
±100 g |
| Acceleration Accuracy: |
±0.2 g |
±1 g |
±2 g |
| Acceleration Resolution: |
0.01 g |
0.05 g |
0.1 g |
| General Specifications |
| Readings: |
174,762 per channel (1,572,858 total readings) |
| Recording Interval: |
64Hz to 5 minutes for shock, selectable in software. Temperature, pressure and humidity, approximately
every 2 seconds at intervals faster than 2 seconds, otherwise sampled at the reading rate. |
| Start Modes: |
Immediate start or delay start, up to 180 days from PC launch |
| Password Protection: |
An optional password may be programmed into the device to restrict access to configuration options.
Data may be read out without the password. |
| Calibration: |
Digital calibration through software |
| Calibration Date: |
Automatically recorded within device |
| Power: |
6 D-cell alkaline batteries, user replaceable |
| Data Format: |
Date and time stamped gravities (g and mg), temperature (°C, °F, K, °R), humidity (%RH, mg/ml water vapor concentration), pressure (PSIA, inHg, mmHg, bar, atm, Torr, Pa, kPa, MPa)
|
| Time Accuracy: |
±1 minute/month at 20 to 30°C |
| User Replaceable Battery: |
60 days typical at 25°C, 1 minute reading rate |
| Computer Interface: |
PC serial or USB (interface cable required); 115,200 baud |
| Computer Interface: |
PC serial or USB (interface cable required); 115,200 baud |
| Software: |
Windows 95/98/ME/NT/2000/XP based software |
| Operating Environment: |
-20 to +54ºC, 0 to 95%RH (non-condensing) |
| Operating Environment: |
-20 to +54ºC, 0 to 95%RH (non-condensing) |
| Dimensions: |
5.5” x 5.4” x 3.2” (140mm x 137mm x 80mm) |
| Weight: |
80 oz. (2.3kg) |
| Enclosure: |
Anodized aluminum |
| Approvals: |
CE |
| Ordering Information |
|---|
|
View Shopping Cart
|
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| |
| Data Logger |
|---|
| MadgeTech UltrashockTemperature, Humidity, Pressure, and Shock Recorder, -50 to +50G, Extended Battery |
ULTRASHOCK-EB-50 |
$899.00 |
contact us |
Contact us to order |
| MadgeTech UltrashockTemperature, Humidity, Pressure, and Shock Recorder, -5 to +5G, Extended Battery |
ULTRASHOCK-EB-5 |
$899.00 |
contact us |
Contact us to order |
| MadgeTech UltrashockTemperature, Humidity, Pressure, and Shock Recorder, -100 to +100G, Extended Battery |
ULTRASHOCK-EB-100 |
$899.00 |
contact us |
Contact us to order |
| |
| Software and Communication Cable (One required) |
|---|
| MadgeTech Software and RS-232 Interface Cable Kit |
IFC110 |
$99.00 |
contact us |
Contact us to order |
| MadgeTech Software and USB Interface Cable Kit |
IFC200 |
$119.00 |
contact us |
Contact us to order |
